Installation, Requirements, Hardware installation – Dataman 530 Series User Manual

Page 8: 3 software installation

Advertising
background image


DATAMAN 530 series AWG

User’s Guide

1. Installation

1.1. Requirements

Minimum configuration:
- PC PENTIUM compatible computer
- 64MB RAM
- CD-ROM
- VGA with resolution 800 x 600
- USB port 1.1
- mouse or other tracking device
- at least 20MB free space on the hard drive
- MS Windows 98 SE, ME, 2000 or XP

Recommended configuration:
- PC PENTIUM compatible computer with speed of at least 800MHz
- 256MB RAM
- CD-ROM
- VGA with resolution at least 1024x768
- USB port 2.0
- mouse or other tracking device
- at least 20MB free space on the hard drive
- MS Windows 98 SE, 2000 or XP

1.2. Hardware installation

Connect one side of the cable to the computer and the other one to the device. Proceed
with the software installation.

WARNING: Always use the cable included in the package. Using the improper
cable can cause communication problems with the computer.

1.3 Software installation

The software and the device drivers are located on the enclosed CD. Insert the CD
into the CD-ROM drive. Then follow the instructions of the setup program that should
launch automatically. If the CD autorun is not enabled in your computer’s settings,
please run file autorun.exe from the CD.

- 8 -

Advertising