Caple CRG902SS - Manual (Page 14)

14
A
B
Fig. 3.6
Fig. 3.7
Oven burner and grill burner replacement of injectors
a) oven burner
– Lift and remove the lower panel inside the oven.
– Unscrew and remove the burner securing screw A (fig. 3.6).
– Slacken screw B (fig. 3.6).
– Withdraw the burner in the manner shown in figure 8.7, and rest it inside the oven.
Take care not to damage the wire to the ignition electrode and the safety valve probe.
– Using a 10 mm box spanner, unscrew the injector (indicated by the arrow in fig. 3.7)
and replace with a new injector selected in accordance with the “TABLE FOR THE
CHOICE OF THE INJECTORS”; then replace the burner repeating the above steps
in reverse order.