Caple CRG902SS - Manual (Page 26)

26
Ignition of the grill burner The grill burner generates the infra-red
rays for grilling.
To light the grill burner operate as follow:
1) Open the oven door.
2) Lightly press and turn the thermostat
knob clockwise to the
position (fig. 6.4).
3) Press the knob right down to prime
the electric ignition.
WARNING: Risk of explosion! The
oven door must be open during this
operation.
In case of power cut, press the knob
and put a lighted match to the right
and left side of the burner (fig. 6.5).
Never continue this operation for
more than 15 seconds. If the burn-
er has still not ignited, wait for
about 1 minute prior to repeating
the ignition.
4) Wait about 10/15 seconds after the
burner lighting before releasing the
knob (time of priming of the valve).
5) Half-close the oven door slowly.
If the flame extinguishes for any reason,
the safety valve will automatically shut
off the gas supply to the burner.
To re-light the burner, first turn the oven
control knob to position
● , wait for at
least 1 minute and then repeat the
lighting procedure.
Do not grill with oven door closed.
Always fit the heat shield supplied
with the cooker under the front
panel before commencing
operations (Fig. 6.6).
WARNING. The heat shield and the
oven door reaches a very high
temperature whilst in use. Keep
children away and allow to cool
before removing.
Fig. 6.4
Fig. 6.5