IDK MSD-54 Series - Manual (Page 228)

MSD-54 SERIES User’s Guide
228
8.16.6 Input bitmap channel assignment [CHANNEL ASSIGN]
A bitmap can be treated as an input video source by assigning the bitmap to any input that is not currently
being used. A bitmap can be assigned to an output or input separately.
･Not assign bitmap to input: OFF [Default]
･Assign bitmap to input: ON
Note:
Larger resolutions require a longer writing time; it may take approximately 6 seconds at a maximum to write a
bitmap. If you switch a normal image to a bitmap image, it takes longer time to output the image, and you
cannot perform other operations while the bitmap is being written.
1. To assign bitmap channel using menu:
MSD-5404 Top
↓ SET key
[FUNCTION SELECT]
BITMAP
▲▼keys: Select “BITMAP”.
↓ SET key
[BITMAP]
CHANNEL ASSIGN
▲▼keys: Select “CHANNEL ASSIGN”.
↓ SET key
[OUT1 ASSIGN]
IN
1 OFF
▲▼keys: Select the desired input assigned for OUT1 (IN1 to IN9).
↓
◄►keys
[OUT1 ASSIGN]
IN1
O FF
▲▼keys: Select “OFF” or “ON”. *
↓ SET key: Applies settings.
[CHANNEL ASSIGN]
NOW UPDATE... Displays the message for 1 second before automatically returning to
the previous screen.
↓
[BITMAP]
CHANNEL ASSIGN
Note:
If you do not press the “SET” key, the assignment is not changed. Make sure to press the “SET” key.
* If several bitmaps are registered, select the bitmap number you want to output.
2. To assign bitmap channel using commands:
@SBA: Set bitmap input channel assignment
@GBA Get bitmap input channel assignment