PLANET NAS-3410 - Manual (Page 29)

21
Frame: Frame types determine how packets of network data are formatted on different LANs. The
default setting is AUTO in the NAS-3410.
Internal Network Number: A logical network number that identifies an individual NetWare server
on the LAN.
Configuring NetWare Settings
1. Click the Enable NetWare Network (NCP Protocol) checkbox to enable access for NetWare
client.
2. The NetWare server name is the original server name following by a “_NW”. For example, if the
server name of the NAS-3410 is “ABC” then the NetWare server name will be “ABC_NW”.
3. Click Apply to save the setting.
4.7 Web Data Access Settings
This section shows the parameters that you can set up for user to access NAS-3410 user’s home
page. You can configure the user access constraint, authentication policy and default setting by
defining the Access Control, Security Policy and Default User Page settings.
Configuring Web Data Access
1. Click the Enable Web Data Access (HTTP Protocol) checkbox to enable Web data accessing.
2. Choose Allow file download only or Allow file upload and download.
3. Click the Local account authentication radio button to authenticate user using the server’s local
user database.
4. Or, click the Local and domain account authentication radio button to use both local account
and Microsoft domain security authentication.
5. Select the default type of the folder display on the user page. You can choose from Detail View,
Large Icons or Small Icons.
6. Click the checkbox beside the Allow users to modify ACL to give users the privilege to modify
the ACL table entries.
7. Click Apply to save the setting.
4.8 FTP Data Access Settings
Configuring FTP Data Access
NAS-3410 supports File Transfer Protocol (FTP) that allows users to transfer files via the Internet.
By properly configuring the FTP settings, you can effectively control how users access the content
in your NAS-3410 via FTP.
1. Click the Enable FTP Data Access checkbox to enable FTP data accessing.
2. Select the Access Control type. Click the Allow file download only or Allow file upload and