Icron USB Extender Mounting Kit for Ranger 2301 and 2312 (Silver) - Manual (Page 2)

Thank you for purchasing the USB 2.0 Ranger 2301 or 2301GE-LAN.
Please read this guide thoroughly.
This document applies to the following Part Numbers:
Model
NA
System
EU
System
UK
System
AU
System
JP
System
Ranger 2301 00-00391 00-00392 00-00393 00-00394 00-00395
Ranger 2301GE-LAN 00-00396 00-00397 00-00398 00-00399 00-00400
FCC Radio Frequency Interference Statement Warning
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received
including interference that may cause undesired operation.
CE Statement
We declare under our sole responsibility that the USB 2.0 Ranger 2301 Series, to which this declaration
relates, is in conformity with European Standard EN 55022, EN 61000 and EN 55024.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical
and electronic equipment (WEEE). Implementation of WEEE regulations may vary slightly by individual EU
member states. Please check with your local and state government guidelines for safe disposal and recycling
or contact your national WEEE recycling agency for more information.
Product Operation and Storage
Please read and follow all instructions provided with this product, and operate for intended use only.
Do not attempt to open the product casing as this may cause damage and will void warranty. Use only
the power supply provided with this product. When not in use, product should be stored in a dry location
between -20°C and 70°C.
©2016 Icron Technologies Corporation. All rights reserved. Icron Technologies Corporation, the Icron
Technologies Corporation logo, and the Icron Technologies Corporation products referred to herein are
either the trademarks or the registered trademarks of Icron Technologies Corporation. All other trademarks
are property of their respective owners. Icron Technologies Corporation assumes no responsibility for errors
that may appear in this manual. Information contained herein is subject to change without notice.
Document #90-01435-A01