Preparing your site, Installing the lex, Installing the rex – Icron USB Extender Mounting Kit for Ranger 2301 and 2312 (Silver) User Manual
Page 8
Installing the LEX
1.
Place the LEX near the computer.
2.
Connect the supplied USB cable between the LEX host port and a USB port on the host computer.
Connecting the LEX to the REX
With Surface Cabling:
1.
Connect the CAT 5e/6/7 cable into the Link port of the LEX.
2.
Connect the CAT 5e/6/7 cable into the Link port of the REX.
With Premise Cabling:
1.
Connect a CAT 5e/6/7 patch cable (not provided) into the information outlet near the host computer.
2.
Connect the patch cable into the Link port of the LEX.
3.
Connect a CAT 5e/6/7 patch cable (not provided) into the information outlet near the USB devices.
4.
Connect the patch cable into the Link port of the REX.
Installing the REX
1.
Place the REX near the USB device.
2.
Assemble the power adapter and country specific power cord together and connect them into a
suitable AC outlet.
3.
Connect the power adapter to the REX.
7