Quantum Instruments Qflash TRIO Basic Flash for Cameras - Manual (Page 24)

11. A Automatic Mode Operation
11.1 On camera Auto mode
F/number, ISO are user
adjustable. Pressing the Set
button will highlight them in
that order. Use the
left (-) Å
and right (+) Æ arrow buttons
to adjust the highlighted setting
down or up.
Flash distance displays the working distance between your Qflash and
Subject based on the current settings. Moving outside this range may
result in an under or overexposed picture.
Using the Radio (on camera)
The internal radio can be used to trigger remote flashes, or room lights.
Set radio to
SYNC .
Or the radio can be used to control the light output of remote Qflashes.
Set radio to LINK. The remote flash can be another Trio in
RL mode or a
Qflash model 5d-R set to Linked to Local with an FW7Q, FW8R, or
FW10w.
Be sure that the channel and zones match the channel and zones set on
the Trio. See section 8.0 for setting the Channel and Zones on the Trio
11.2 Off Camera Auto mode
In the off camera operation the
Fill adjust will be disabled,
however the F/number, ISO
are user adjustable. Pressing
the Set button will highlight
them in that order. Use the
left (-) Å and right (+) Æ arrow
buttons to adjust the
highlighted setting down or up.
22
MODE
/OK
SET
A UTO
F 5.6 7
2.4 –22 FT ISO 200
FIRE OPT SAVE RADIO
MODE
/OK
SET
A UTO
F 5.6 7
2.4 –22 FT ISO 200
FIRE OPT SAVE RADIO
+ -
+ -
A