Quantum Instruments Qflash TRIO Basic Flash for Cameras - Manual (Page 35)

19. PRGM Program Mode Operation
The Program mode allows you to store your favorite settings and set-ups
and then quickly recall them just by pressing the soft keys. You can
program up to 8 Qflash set-ups of Manual, Auto, or TTL operation,
including settings for all parameters.
19.1 Saving a set up
When you find a set up you like and want to store it, press the
SAVE soft
key. The display will prompt you to determine the program number
(P
number ) that you want to save the set up as. Use Left (-) Å and Right
(+) Æ buttons to adjust the P number up or down. Once you’ve selected
the P number you want to store the set up as, then press the save soft
key. If you wish to not save the set up, then press the exit soft key.
19.2 Using the program mode.
To enter the program mode, press the
MODE button, then press the
PRGM MODE soft key, then press the MODE button again.
The current program number
will be displayed along with the
mode and the settings for that
program.
The soft keys allow you to
change to a different program
number quickly.
You can change the function of
the soft keys by pressing the
Left (-) Å and Right Æ buttons when nothing is highlighted.
The available soft key functions depend on the mode of the program.
Any changes made to the settings of any program are saved to that
program automatically. There is no need to take any action to save the
changes.
To exit the program press the
MODE button, then use the Left (-) Å and
Right (+) Æ buttons to select a new mode, then press the MODE button
again.
33
P1 Q TTL F ILL +0
F 5.6 7
ISO 200
P1-P2 P3-P4 P5-P6 P7-P8
MODE
/OK
SET
+ -
PRGM