Configuration (standalone), Automatic mixed effect mode, Sound-active mixed effect mode – CHAUVET DJ GigBAR Move + ILS 5-in-1 Lighting System with Moving Heads, Pars, Derbys, Strobe, and Laser Effects User Manual
Page 21: Sound sensitivity, Dimmer, Operation configuration (standalone)
Page 15
GigBAR MOVE + ILS User Manual Rev. 3
Operation
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Automatic Mixed Effect Mode
To run the GigBAR MOVE + ILS in automatic mode, follow the instructions below.
1. Press
<MENU>
to view the main menu on the display.
2. Use
<UP>
or
<DOWN>
until
AUTO
is highlighted.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
Program
.
5. Press
<ENTER>
.
6. Use
<UP>
or
<DOWN>
to select from the Auto Program options:
Mix 1–4
,
Spots
,
Strobe
,
Laser
,
Derby
,
Par
,
S+SP
,
L+SP
,
LS
,
D+SP
,
DS
,
DL
,
P+SP
,
PS
,
PL
,
PD
,
PS+SP
,
PL+SP
,
PLS
,
PD+SP
,
PDS
,
PDL
,
DLS+SP
,
PLS+SP
,
PDS+SP
,
PDL+SP
, or
PDLS
.
7. Press
<ENTER>
.
8. Use
<UP>
or
<DOWN>
to select
Mode
.
9. Press
<ENTER>
.
10. Use
<UP>
or
<DOWN>
to select between
Snap
(snap transition between programs) and
Fade
(fading transition between programs).
11. Press
<ENTER>
.
12. Use
<UP>
or
<DOWN>
to select
Speed
.
13. Press
<ENTER>
.
14. Use
<UP>
or
<DOWN>
to select to adjust the program speed, from
0
–
99
.
15. Press
<ENTER>
.
Sound-Active Mixed Effect Mode
To run the GigBAR MOVE + ILS in sound-active mode, do the following:
1. Press
<MENU>
to view the main menu on the display.
2. Use
<UP>
or
<DOWN>
until
SOUND
is selected.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
Program
.
5. Press
<ENTER>
.
6. Use
<UP>
or
<DOWN>
to select from the Auto Program options:
Mix 1–4
,
Spots
,
Strobe
,
Laser
,
Derby
,
Par
,
S+SP
,
L+SP
,
LS
,
D+SP
,
DS
,
DL
,
P+SP
,
PS
,
PL
,
PD
,
PS+SP
,
PL+SP
,
PLS
,
PD+SP
,
PDS
,
PDL
,
DLS+SP
,
PLS+SP
,
PDS+SP
,
PDL+SP
, or
PDLS
.
7. Press
<ENTER>
.
Sound Sensitivity
To set the sound sensitivity on the GigBAR MOVE + ILS, follow the instructions below:
1. Press
<MENU>
to view the main menu on the display.
2. Use
<UP>
or
<DOWN>
until
SOUND
is selected.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
Sensitivity
.
5. Press
<ENTER>
6. Use
<UP>
or
<DOWN>
to set the sound sensitivity from
0–99
.
7. Press
<ENTER>
.
Dimmer
To adjust the dimmer on the GigBAR MOVE + ILS, do the following:
1. Press
<MENU>
to view the main menu on the display.
2. Use
<UP>
or
<DOWN>
until
AUTO
or
SOUND
is selected.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
Dimmer
.
5. Press
<ENTER>
.
6. Use
<UP>
or
<DOWN>
to set the dimmer from
0–255
.
7. Press
<ENTER>
.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
•
The product will only respond to low frequencies of music (bass and drums).
•
The laser will black out when in Sound-Active mode after 3 seconds of silence or noise
below the sensitivity setting.