Canon EOS RP Mirrorless Camera - Manual (Page 186)

186
Selecting the AF Operation
One-Shot AF for Still Subjects (ONE SHOT)
Suited for still subjects. When you press the shutter button halfway,
the camera will focus only once.
z
When focus is achieved, the AF point will turn green and the beeper will
sound.
z
The focus remains locked while you hold down the shutter button halfway,
allowing you to recompose the image before taking the picture.
z
For details on the continuous shooting speed for continuous shooting,
see = 206.
o If [
5
: Beep] is set to [Disable] , the beeper will not sound when focus is
achieved.
Servo AF for Moving Subjects (SERVO)
This AF operation is suited for moving subjects. While you hold down
the shutter button halfway, the camera will keep focusing on the
subject continuously.
z
When focus is achieved, the AF point will turn blue.
z
The exposure is set at the moment the picture is taken.
z
For details on the continuous shooting speed for continuous shooting,
see = 206.
o Depending on the lens used, the distance to the subject and the subject’s
speed, the camera may not be able to achieve correct focus.
o Zooming during continuous shooting may throw off the focus. Zoom first, then
recompose and shoot.
o With Servo AF, the beeper will not sound even when focus is achieved.
o In < A > mode, by default, the camera automatically switches to Servo AF in
response to subject movement. If you normally prefer to shoot with One-Shot
AF, set [
z
: A Auto servo] to [Disable] .