Gateway 955 - Manual (Page 41)

35
Updating the baseboard management controller firmware
www.gateway.com
6
Download the BMC update file from support.gateway.com .
7
Follow the instructions included with the update file.
8
Turn off the server, then disconnect the power cord and wait for the
Standby power LED to turn off.
9
Follow the instructions in “Opening the server case” on page 46 .
10
Move the BMC Write Enable jumper back to pins 2-3.
11
Follow the instructions in “Closing the server case” on page 48 , then
reconnect the power cord.
Pins 2-3