Gateway ALR 7300 - Manual (Page 39)

Installing Components 29
Figure 13: Installing the Replacement Processor
8. If the processor cartridge does not already have the heatsink attached
to it, attach the heatsink according to the instructions that came with
the processor upgrade kit.
9. Replace the lock bar on the processor support and secure it with the
two screws that you removed in Step 3.
10. Set the jumpers for the new processor configuration (see the section
“Setting the jumpers” on page 33).
11. Close the case, as described in “Closing the system” on page 8.
12. Reconnect the power cord and turn on the system.
4075.book Page 29 Friday, April 2, 1999 9:26 AM