Motorola AP-51XX - Manual (Page 126)

AP-51xx Access Point Product Reference Guide 4-34
5. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on SNMP Trap Configuration screen to the last saved configuration.
6. Click Logout to securely exit the access point Access Point applet. A prompt displays
confirming the logout before the applet is closed.
4.5.3 Configuring Specific SNMP Traps
Use the SNMP Traps screen to enable specific traps on the access point. Motorola recommends
defining traps to capture unauthorized devices operating within the access point coverage area. Trap
configuration depends on the network machine that receives the generated traps. SNMP v1/v2c and
v3 trap configurations function independently. In a mixed SNMP environment, traps can be sent using
configurations for both SNMP v1/v2c and v3. To configure specific SNMP traps on the access point:
1. Select System Configuration - > SNMP Access - > SNMP Traps from the menu tree.