Select\store\ld, 8 select\store\ld, 1 select\store/ld\store – Mocomtech CIM-550 User Manual

Page 78: Select\store/ld\load

Advertising
background image

CiM-550 IP Enabled Satellite Modem

Rev. 2

Front Panel Menus

CD/CIM550.IOM

52

4.1.8 SELECT\STORE\LD

DISPLAY SELECTIONS/DESCRIPTION

STORE/LOAD CONFIG:

STORE LOAD (PRESS ENTER)

STORE

LOAD

These sub-menus permit the user to store or load
up to 10 different modem configurations in the non-
volatile memory of the modem

4.1.8.1 SELECT\STORE/LD\STORE

DISPLAY SELECTIONS/DESCRIPTION

STORE CONFIGURATION TO

LOCATION: 10 (ENTER)

Select the location to store the current configuration
to, using the UP/DOWN arrow keys, then press
ENTER. Locations 1 through 10 are available.

If the selected location does not contain a previously
stored configuration, the following screen is
displayed:

YOUR CONFIGURATION HAS

BEEN STORED! (ENTER)

If, however, the selected location contains a
previously stored configuration, the following screen
is displayed:

WARNING!LOC 10 CONTAINS DATA!

OVERWRITE? NO YES

Selecting YES will overwrite the existing
configuration at the selected location.

4.1.8.2

SELECT\STORE/LD\LOAD

DISPLAY SELECTIONS/DESCRIPTION

LOAD CONFIGURATION FROM

LOCATION: 10 (ENTER)

Select the location to load a configuration from,
using the UP/DOWN arrow keys, then press
ENTER. Locations 1 through 10 are available.

If the selected location contains valid data, the
following screen will be displayed:

THE NEW CONFIGURATION

HAS BEEN LOADED (ENTER)

If, however, the selected location does not contain
valid data, the following screen will be displayed:

Advertising