MITSUBISHI ELECTRIC Trium 110 - Manual (Page 36)

36
KEEP A RECORD OF YOUR CODES
AND KEEP THEM IN A SAFE
PLACE. FAILURE TO DO SO CAN
CAUSE YOU CONSIDERABLE IN-
CONVENIENCE.
Phone lock code
A phone lock code prevents unau-
thorised access to the phone and
WAP™ settings. You also need it
to reset the call timers. The facto-
ry setting is
0000 . Reset this code
and keep it in a safe place, sepa-
rate from the phone. When ena-
bled the phone asks for the code
each time the phone is turned on.
To change the phone lock code:
To turn on or off the phone lock
code:
PIN code
The 4-8 digit PIN code for the SIM
protects it from unauthorised
use. When enabled the phone re-
quests the PIN code each time the
phone is turned on. If you enter
the wrong PIN code three times in
succession your SIM card is
blocked and you need the 8 digit
PUK code from your service pro-
vider (see page 37). To turn on
and off the PIN:
To change the PIN code (PIN must
first be enabled):
PIN2 code
The PIN2 code prevents unau-
thorised access to FDN opera-
tions, modifying the FDN phone
book, setting calls costs to zero,
modifying the costs display fea-
tures. You can change it but you
Avoid using codes similar to emergency numbers
such as 999 or 112 to prevent accidental dialling
of these numbers.
Press . Select Settings .
Select Phone settings . Select
Security .
Select Phone lock .
Select Change code and fol-
low the display prompts.
Press
OK to validate the
new code.
Press and hold
Exit or
to return to the stand-by dis-
play.
Press . Select Settings .
Select Phone settings . Select
Security .
Select Phone lock .
Select On or Off .
The phone requests the
phone lock code to authorise
your selection.
Press and hold
Exit or
to return to the stand-by dis-
play.
Phone lock still enables you to make emergency
calls.
1
2
3
4
5
6
1
2
3
4
5
6
Press . Select Settings .
Select Phone settings . Select
Security .
If already off, PIN enable
appears.
If already on, PIN disable
and PIN change appear.
Press Select and follow
the displayed prompts.
Press
OK to validate your
entry. PIN enabled or PIN
disabled appear briefly to
confirm your action.
Press and hold
Exit or
to return to the stand-by dis-
play.
Press . Select Settings .
Select Phone settings . Select
Security .
Select PIN change and follow
the displayed prompts.
Press
OK to validate your
new PIN.
Press and hold
Exit or
to return to the stand-by dis-
play.
1
2
3
4
5
1
2
3
4
5