MITSUBISHI ELECTRIC Trium 110 - Manual (Page 45)

Th
e
m
en
u
45
The alarm sounds for up to
1 minute.
Alarm clock and a vibrat-
ing bell symbol appear with the cur-
rent time and the softkeys,
Valid. and No ring . During a
call, the alarm also sounds.
To stop the alarm:
To use as a Reminder or Snooze
Alarm:
You can repeat the snooze for up to
15 minutes, after which the phone
returns to its previous state, either
off or on stand-by.
To turn off the alarm:
Auto-switch
You can set your phone to switch
on and off automatically. Turning it
off helps to conserve battery life.
Please note that during auto-switch
on, you must re-enter your PIN
code. The phone does not go into
power saving mode until you enter
your code. To activate the auto-
switch:
To turn off the auto-switch:
Calculator
To access and use the calculator:
Press Select or to return to
the stand-by display.
appears.
Press Valid. .
Press No ring , or any other key
(except Valid. ) to stop the
alarm. The alarm icon remain on
the display and the alarm rings
again 3 minutes later.
Press . Select Office Tools .
Select Alarm clock .
Select Off . Confirmation
appears.
Press and hold
Exit or
to return to the stand-by dis-
play.
Caution - Please remember to
turn off the alarm feature when
boarding an aircraft where the
use of a mobile phone is not
permitted and is illegal. Alterna-
tively, you can remove the bat-
tery after turning off the phone.
See the General safety warnings
on page 4.
4
1
2
3
4
Press . Select Office Tools .
Select Auto-switch .
Select Auto-switch-on .
Select On.
Enter the time you want the
phone to turn on and
press OK . Confirmation
appears.
Select Auto-switch-off.
Select On.
Enter the time you want the
phone to turn off and
press OK .
Press and hold
Exit or
to return to the stand-by dis-
play. The icon appears in
the stand-by display.
Press . Select Office Tools .
Select Auto-switch .
Select Auto-switch-on .
Select Off. Stored appears.
Select Auto-switch-off.
Select Off. Stored appears.
Press and hold
Exit or
to return to the stand-by dis-
play.
Press . Select Office Tools.
Select
Calculator .
Enter a number and press
several times to choose + , - ,
* or / or to enter a ,.
Enter the second number and
either repeat step or select
= to compute. Select
Clear to correct any mis-
takes or clear the display.
Press to return to the
stand-by display.
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
1
2
3
4
3
5