Sharp MD-MT90 - Manual (Page 42)

00/12/26 90SEC_40_47.fm
42
Re
fe
re
n
c
e
s
-E
rr
or M
ess
a
g
es-
Error Messages
ERROR MESSAGES MEANING REMEDY
BATT EMPTY z The battery is run down. z Charge the rechargeable battery or replace the al-
kaline battery (or use the AC adaptor for power).
BLANK MD z Nothing is recorded. z Replace the disc with a recorded disc.
Can't COPY z You tried to record from a copy prohibited
MiniDisc. z Record using the analog cable.
Can't EDIT z A track cannot be edited. z Change the stop position of the track and then edit it.
Can't READ (*) z The disc data cannot be read because the
disc or unit is damaged. z Reload the disc.
z Replace it with another recorded disc.
Can't REC z Recording cannot be performed correctly
due to vibration or shock. z Re-record or replace it with another recordable
disc.
Can't STAMP z Stamp function does not work. z Check the number of tracks.
Can't WRITE z Cannot save the TOC information correctly
to a MiniDisc. (A large portion of the disc has
been damaged.) z Replace the disc with another recordable disc.
DEFECT z The disc is scratched. z If the sound you hear is not right, record again.
z Replace the disc with another recordable disc.
DISC FULL z The disc is out of recording space. z Replace it with another recordable disc.
Er-MD (**) z The microprocessor has reported a system
fault and the unit is out of order. z To have it repaired, go to the distributor where you
purchased the unit.
HOLD z The unit is in the hold mode. z Cancel the hold mode.
LOCKED z You removed a MiniDisc while recording or
editing. z Turn off the power and remove the MiniDisc.
NO DISC z A disc has not been loaded. z Load a disc.
Number or symbol appears in (*) position.