Sanyo PLC-WXE46 User Manual
Page 23

PLC-WXE46/WXL46
Expand Serial Command Functional Specifications
23/65
8.6 Input Control Command
8.6.1
CF_INPUT Command
Command “CF_INPUT_%1”[CR]
%1
“CONPUTER1” ----- Select Computer1 Input
“COMPUTER2” ----- Select Computer2 Input
“VIDEO” --------------- Select Video Input
“UP” ------------------- Switch Input setting forward
When Computer 2 is selected in Terminal menu:
Computer1
→ Computer2 → Video →Computer1 → …
When Monitor out is selected in Terminal menu:
Computer1
→ Video →Computer1 → …
“DN” -------------------Switch Input setting backward
When Computer 2 is selected in Terminal menu:
Video
→ Computer2 →Computer1→S-video….
When Monitor out is selected in Terminal menu:
Video
→Computer1→….
Details
Select Input
The same operation as “INPUT” button of the Remote Control.
This command is available in normal Power ON status.
Note1) Projector returns “101” by selecting Computer 2 while Monitor out is
selected in Terminal menu.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]
8.6.2
CF_SOURCE Command
Command “CF_SOURCE_%1”[CR]
%1
Input is
Computer 1
“ANALOG” --------- Select Analog Input
“YPBPR” ----------- Select Component Input
“SCART” ----------- Select Scart Input
”UP” ---------------- Switch Input as follows
Analog
→YPBPR →Scart →…
”DN” ---------------- Switch Input as follows
Scart
→YPBPR →Analog →…
Input is
Computer 2
“ANALOG” --------- Select Analog Input
”UP”
”DN”
Although no operation is made, projector accepts parameter ”UP”
/”DN”
Input is Video
“AUTO” -------------- Select Video Auto mode
“VIDEO” ------------- Select Composite Video Input
“S
VIDEO” -------- Select S-Video Input
”UP” ------------------ Switch Input as follows
Auto
→ Video → S-video → Auto…
”DN” ------------------ Switch Input as follows
S-video
→ Video → Auto → S-video…
Details
Select Source of currently selected Input
When Input specified by %1 is inappropriate for selected Input, the projector
returns “101” and the command is not executed.
This command is available in normal Power ON status.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]