Sony PDW-V1 - Manual (Page 30)

Cha
p
te
r 3
Pre
par
at
ion
s
30
3-1 Connections and Settings
When connecting to the VIDEO OUT or SDI OUT connector
Connect a video monitor as example 1 or 2 shown in the
following figure.
3-1-2 Connections for Using PDZ-1 Proxy Browsing Software
Using the supplied PDZ-1 Proxy Browsing Software, you
can carry out simple editing with proxy AV data.
For an overview of PDZ-1 and how to install the software,
see 5-4 “Using PDZ-1 Proxy Browsing Software” on page
54.
For information about how to use the software, refer to the
Help provided in the software.
Using the (network) connector (FTP connection)
The following shows an example of an FTP (File Transfer
Protocol) connection.
Note
To use PDZ-1 requires the PDW-V1 IP address and other
network-related settings to be made beforehand.
For details of the network-related settings, see “To
change network settings” (page 82).
VIDEO OUT
MONITOR
SDI OUT AUDIO MONITOR OUT
L R
S400
2
1
VIDEO OUT
SDI OUT
PDW-V1
Video monitor
To composite video input connector
1 , 2: 75 Ω coaxial cable (not supplied)
To SDI input connector
To superimpose the time code, menu settings, alarm
messages, or other text information on the video signal,
press the CHARACTER button
(see page 26).
VIDEO OUT
MONITOR
SDI OUT AUDIO MONITOR OUT
L R
S400
1
PDW-V1
1 : Network cable (not supplied)
Laptop computer
(network) connector
To network connector
Connecting this unit directly to a laptop computer
Make sure the remote control switch (see page
20) is set to NETWORK.
(Use a crossing cable.)