Sony PDW-V1 - Manual (Page 72)

Cha
p
te
r 7
Men
u
s
72
7-3 Extended Menu
7-3 Extended Menu
7-3-1 Items in the Extended Menu
The extended menu contains the following items.
In the Settings column of the table, underlined values
indicate the factory default settings.
Menu items in the 100s, relating to the control panels
Item number Item name Settings
101 SELECTION FOR SEARCH DIAL
ENABLE Select how the unit enters the shuttle or jog mode.
dial: Press the SHUTTLE or JOG button or, except during recording/
editing, turn the jog dial or shuttle dial.
key: Press the SHUTTLE or JOG button.
114 AUDIO MONITOR OUTPUT LEVEL Select whether or not to control the level of the audio signal output from
the AUDIO MONITOR OUT connector with the LEVEL knob for the
PHONES jack.
var: Control.
fixed: Do not control.
Menu items in the 200s, relating to the remote control interface
Item number Item name Settings
215 PC REMOTE Specify whether to enable FAM connections between this unit and
remote computers.
dis: Disable FAM connections.
ena: Enable FAM connections.
Menu items in the 300s, relating to editing operations
Item number Item name Settings
320 DIGITAL AUDIO PB PROCESS ON
EDIT POINT Select the treatment of audio playback at edit points.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade: Fade out and fade in.
Menu items in the 400s, relating to preroll
Item number Item name Settings
401 FUNCTION MODE AFTER CUE-UP Select the state that the unit goes into after a cuing-up operation.
stop: Stops (the stop mode).
still: Still playback (in jog and shuttle mode).
Menu items in the 500s, relating to disc protection
Item number Item name Settings
501 STILL TIMER To protect the disc against shock and vibrations, and to lengthen the life
of the laser diodes, the unit automatically enters standby off mode
whenever a specified time elapses in a disc stop mode (stop mode or the
still picture mode of search mode). This allows you to set the time after
which the unit exits a disc stop mode and enters standby off mode.
0.5 s to 8 m to 30 m: Can be set in the range from 0.5 seconds to 30
minutes.
off: Do not put into standby off mode.