Konica Minolta bizhub 750 - Manual (Page 106)

Basic Copy Operations 3
bizhub 750/600 3-7
Ba
sic Copy Op
er
ations
Chapter 3
3.3 Positioning the Original
The original can be fed in either of the following two ways. Be sure to position
the original correctly according to the type of original being copied.
To position the original into the ADF
0 For details on the types of original that can be loaded into the ADF, refer
to “Originals” on page 7-33.
0 Do not load original that are bound together, for example, with paper
clips or staples.
0 Do not load more than 100 sheets or so many sheets that the top of the
stack is higher than the
, mark, otherwise an original misfeed or damage
to the original or machine may occur. However, an original that exceeds
100 pages can be scanned in separate batches. For details, refer to
“Scanning the Original in Separate Batches (“Separate Scan” Setting)”
on page 3-11.
0 If the original is not loaded correctly, the original may not be fed in
straight or an original misfeed or damage to the original may occur.
1
Position the original face
up in the ADF.
– Position the original
pages so that the top
of the original is to-
ward the back or the
right side of the ma-
chine.
Document Feed Method Features
Using the ADF By using the ADF, a multi-page original can be fed
automatically. This feed method can also be used with
double-sided original, and is perfect for multi-page double-
sided original.
Using the original glass The document is placed face down directly on the original
glass, then scanned. This method is best with books and
other documents that cannot be fed through the ADF.