Konica Minolta bizhub 750 - Manual (Page 456)

Utility 12
bizhub 750/600 12-43
Utility
Ch
ap
te
r 12
Adjusting the Starting Print Position at the Left Edge
The starting print position at the left edge of the paper (with respect to the
paper feed direction) for each paper tray can be adjusted.
0 The starting print position is adjusted during manufacturing of the ma-
chine. Normally, this position will not need to be adjusted.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
“Displaying the Administrator Setting Screen” on page 12-39.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Printer Adjustment].
The Printer Adjustment screen appears.
5
Touch [2 Centering].
The Centering screen appears.
6
Touch [Test Copy].
The Test Copy screen appears.
7
Press the [Start] key.
A test pattern is printed.
8
Touch [Close].
The Centering screen appears.