Konica Minolta bizhub 750 User Manual
Page 77
2
Before Making Copies
2-32
bizhub 750/600
Before Making C
o
pies
Chapter 2
4
Using the keypad, type in the length of time until the machine enters
Sleep mode again.
Specify a length of time between 5 minutes and 9 hours and 59 min-
utes.
?
How can a single digit be input?
% First, type in “0”. If a minutes setting of less than 5 is entered, the
setting changes to 5 minutes. In addition, a minutes setting of 60 or
more cannot be specified.
5
Touch [OK].
Basic screen appears.
2
Note
As the factory default, the weekly timer is not set.
If the message “Access restricted due to weekly timer. Input amount of
time prior to entering Sleep Mode.” or “Access restricted due to weekly
timer. Input password to interrupt timer.” appears after the sub power
switch is pressed, the weekly timer is set.
!
Detail
During the set time, the copy operations can be performed as usual.
From Administrator mode, the machine can be set so that the screen for
entering the password for non-business hours is not displayed.
The default setting for the “Password for Non-Business Hours” parame-
ter is “OFF” (the screen is not displayed).