PIONEERPOS AT Commands G24-LC - Manual (Page 321)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-257
+MTKE, Motorola ToolKit Enable
This command enables/disables the SIM ToolKit functionality.
The following table shows the +MTKE parameters.
Example
AT+MTKE=? //Test command SIM ToolKit set facilities
+MTKE: (0-1)
OK
AT+MTKE?
+MTKE: 0 //No activation of SIM ToolKit functionality
OK
AT+MTKE=1 //Set all facilities SIM ToolKit (class 2).
OK
AT+MTKE=3 //Syntax error
+CME ERROR:
AT+MTKE=1 //Activation of SIM ToolKit functionality
OK
Command Type Syntax Response/Action Remarks
Set +MTKE=<Enable> OK
or:
+CME ERROR: <err>
The Set command tells
the G24-L in which mode
to work.
Read +MTKE? +MTKE: <State> The Read command
returns the current values.
Test +MTKE=? +MTKE: (list of supported
<state>s)
OK
The Test command
returns the supported
values as a compound
value.
Table 3-183: +MTKE Parameters
<Parameter> Description
<State> Indicates the state of the SIM ToolKit:
0
Deactivate the SIM ToolKit functionality
1 Activate the SIM ToolKit functionality
The default is 0.