PIONEERPOS AT Commands G24-LC - Manual (Page 415)

Appendix A: Reference Tables
April 15, 2008 G24-L AT Commands Reference Manual A-13
+MIPSTAT This unsolicited event is sent to
the terminal indicating a change
in link status. Page 3-288
+MIPXOFF This unsolicited event is sent to
the terminal to stop sending data. Page 3-288
+MIPXON This unsolicited event is sent to
the terminal when the G24-L has
free memory in the accumulating
buffer. Page 3-289
+MMAD This command reads and
monitors digital value from a
specified ADC. Page 3-149
+MMAR This command changes the status
of an SMS message in the G24-L
memory from "REC UNREAD"
to "REC READ". Page 3-101
+MMICG This command handles the
selection of microphone gain
values. Page 3-172
+MMGL This command displays a list of
SMS messages stored in the
G24-L memory. Page 3-89
+MMGR This command enables the user
to read selected SMS messages
from the G24-L memory. Page 3-94
+MPCMC This command defines whether
the PCM clock is generated
continuously or not, when
module is in digital audio mode. Page 3-153
+MPING This command will allow
verifying IP connectivity to
another remote machine
(computer) by sending one or
more Internet Control Message
Protocol (ICMP) Echo Request
messages. Page 3-292
+MPINGSTAT This is the unsolicited response
that the G24-L sends to the
terminal to inform of ping
execution status update and
provides summary statistics of
ping request when ping request
execution is completed. Page 3-296
+MRST This command enables customer
software to perform a hard reset
to the G24-L unit. Page 3-143
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page