National Instruments AT E Series - Manual (Page 129)

Appendix A Specifications for AT-MIO-16XE-10 and AT-AI-16XE-10
AT E Series User Manual A-24 ni.com
Crosstalk, DC to 100 kHz
Adjacent channels............................–75 dB max
All other channels............................–90 dB max
Stability
Offset temperature coefficient
Pregain.............................................±5 µV/°C
Postgain ...........................................±120 µV/°C
Gain temperature coefficient ..................±7 ppm/°C
Analog Output (AT-MIO-16XE-10 only)
Output Characteristics
Number of channels................................2 voltage
Resolution ...............................................16 bits, 1 in 65,536
Max update rate ......................................100 kS/s
Type of DAC .........................................Double-buffered
FIFO buffer size......................................2,048 samples
Data transfers ..........................................DMA, interrupts,
programmed I/O
DMA modes ...........................................Single transfer, demand transfer
Transfer Characteristics
Relative accuracy (INL) .........................±0.5 LSB typ, ±1 LSB max
DNL ........................................................±1 LSB max
Monotonicity ..........................................16 bits, guaranteed
Offset error
After calibration...............................305 µV max
Before calibration ............................20 mV max