Tyan Computer Transport GS10 B2094T15 - Manual (Page 19)

19
http://www.TYAN.com
2. Detach the inner slide from the outer slide by pressing on the release latch Πand pulling
apart the inner slide from the outer slide •. Do the same for the other slide.
3. Align the inner slide’s first round screwhole with the screwhole on the system chassis beside
the mounting ears and attach the screw together with next screwhole. Do the same for the
other side .
NOTE: For the correct orientation on mounting the inner slides to the cabinet, refer to the
picture above.
4. Attach a post slide mount adapter to the front end of the outer slide by securing 2 sets of hex
screws and hex nuts together without stretching the inner rails.
5. Attach a post slide mount adapter to the rear end by moving the inner rails to expose the
screw holes. Do the same for the other outer slide.
6. Attach the newly assembled outer slide with the post slide mount adapters to the front and
rear corners of the rack that you will use to place the system chassis by securing only the first
and last screwholes (dark-colored screws), omitting the middle screwhole. Do the same for
the other side.