Tyan Computer Transport GS10 B2094T15 - Manual (Page 4)

4
http://www.TYAN.com
Safety Precautions
l Use the type of power indicated on the marking label.
l Ensure electrical circuits are not overloaded; consider the nameplate ratings of all the
connected equipment and ensure you have over current protection.
l Do not disable the power cord ground feature. This equipment was designed to connect to a
grounded (earthed) power outlet. The grounding plug is an important safety feature.
l Ensure that the power outlet is located or installed near the equipment and is easily
accessible.
l Do not allow anything to rest on the power cord. Do not locate this product where persons
will walk on the cord.
l Ensure the ambient temperature around the equipment (which may be higher than the room
temperature) is within the limits specified in section 1.3.
l Slots and openings in the cabinet are provided for ventilation. Do not block or cover these
openings. Do not push objects of any kind into cabinet slots or openings.
l Do not allow USB devices to be hot plugged during installation of the Linux operating
system.
l Use the command ‘expert’ to start Linux installation during ‘boot:’ when prompted, if
you want to use the RAID function on your system. Insert the RAID driver diskette for
Linux when prompted into the USB floppy drive, and follow the onscreen instructions to
complete the installation process.