Ip settings – TANDBERG D12155-10 User Manual
Page 82
82
TANDBERG Videoconferencing System
Advanced use
IP Settings
IP-assignment
DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.
DHCP: IP-address, IP-subnet mask and Gateway are not used because these parameters are assigned by
the DHCP server.
Static: The codec’s IP-address and IP-subnet mask must be specified in the IP-address field.
IP-address
IP-address defines the network address of the codec. This address is only used in static mode. In DHCP-mode,
the assigned IP-address can be found on the Welcome Menu.
IP-subnet mask
IP-subnet mask defines the type of network. This address is only used in static mode. Your LAN-administrator will
provide the correct value for this field.
Gateway
When using DHCP, the default gateway will be set automatically. If the LAN utilizes static IP addresses, IP
address, subnet mask, and default gateway must be specified by the LAN administrator.
C
HANGES
IN
THIS
MENU
WILL
NOT
HAVE
ANY
EFFECT
BEFORE
THE
SYSTEM
IS
RESTARTED
.
NOTE