ZyXEL Communications AES-100 - Manual (Page 37)

AES-100 User’s Guide
ADSL Configuration 5-5
Current Operating Modes:
Data Mode: ATM Service Type in operation: G.DMT
Number of Channels (Down/up stream): 1/1
Downstream Framing Structure : 3
Active down/up stream rate option : 1/1
TRELLIS operation mode is : ON
Current Connection detail:
Down/up stream interleaved Delay : 4/ 4 ms
Downstream Parity byte assigned to fast/interleaved : 0/ 2
Upstream Parity byte assigned to fast/interleaved : 0/ 2
Downstream Symbols assigned to fast/interleaved : 0/ 1
Upstream Symbols assigned to fast/interleaved : 0/ 1
Down/up stream Depth value : 2/ 2
Total Transceiver Output Power : 8dB
Current ATUR Information:
Country code 0
Provider Code 01020304
Capabilities:
g.dmt POTS overlap (Annex A)
The results contain the operating modes, interleave delay, parity byte assignment, parity bytes per codeword,
symbols per codeword and interleave depth. Current ATUR Information contains data acquired from the
ATUR (stands for ADSL Termination Unit – Remote, in this case the user’s ADSL modem or router) during
negotiation/provisioning message interchanges. It includes the Vendor ID and Version Number obtained from
Vendor ID fields (g.994.1) or R-MSGS1(T1.413) and country code from Vendor ID (g.994.1).
Information obtained prior to training to steady state transition will not be valid or will be old information.
5.5.8 Lineperf Command
Syntax:
192.168.1.1 adsl> lineperf <port number>
where
<port number> = port number, from 1 to 8
The lineperf command shows the line performance counters of an ADSL port.
An example is shown next.
192.168.1.1 adsl> lineperf 7
nfebe-I/nfebe-ni : 0/0
ncrc-I/ncrc-ni : 0/0
nfecc-I/nfecc-ni : 0/0
nfec-I/nfec-ni : 0/0
nblks-ds/nblks-us : 120878/120878