ZyXEL Communications AES-100 User Manual
Page 76
Advertising
AES-100 User’s Guide
12-2
Configuration Backup/Restore
Do not turn off the ADSL Networking Module during the restore process, as it may corrupt the firmware and
make your ADSL Networking Module unusable.
Step 1.
Connect to the ADSL Networking Module with your favorite FTP client. The command is generally
C:\> ftp <ADSL Networking Module IP address>
at the computer command prompt.
Step 2.
Enter the User name (just press [ENTER]).
User: <ENTER>
Step 3.
Enter the management password (1234 by default).
Password: 1234
230 Logged in
Step 4.
Transfer the configuration files to the ADSL Networking Module
ftp> put init
Step 5.
Quit FTP.
ftp> quit
Wait for the update to finish. The ADSL Networking Module restarts automatically.
Advertising