ZyXEL Communications Omni TA128 - Manual (Page 136)

124
Command Options Function & Description Ref.
&I3 Leased line mode for B1 & B2
channel.
&Jn Bundle selection (See also S100) S87.5-6
&J0 * Bundle connection is disabled.
&J1 Bundle connection is enabled in
answer mode only.
&J2 Bundle connection is enabled in call
mode only.
&J3 Bundle connection is enabled in
both directions.
&Knn V.120/X.75 compression control.
&K must be followed by two digits. S83.2
&K00 Disable V.42bis.
&K44 Enable V.42bis.
&Ln Analog port selection during call
answering. S84.5
&L0 Set priority to analog port, Phone 1.
&L1 Set priority to analog port, Phone 2.
&Mn Bundle selection (See also S100). S14b6-7
&M0 * Asynchronous mode with data
buffering.
&M1 Asynchronous command,
synchronous data.
&M2 Direct asynchronous mode, no data
buffering.
&M3 Synchronous mode.
&On Set default call type for conventional
dialing commands. S83.4-5
&O0 ATDs, ATDPs, and ATDTs default
to make calls for analog adapter,
Phone 2.
&O2 ATDs, ATDPs, and ATDTs default
to make ISDN data calls.