ZyXEL Communications ZyXEL ExpWave 240B - Manual (Page 36)

ExpWave 240B Secure Outdoor Ethernet Radio Link
3-6 Initial Setup
Step 5. Set DHCP to server and Client IP Pool Starting Address like 192.168.223.33. You can also setting the Size of Client
IP Pool, Primary DNS and Secondary DNS Server.
Figure 3-14 AC1 LAN DHCP Setup
Step 6. Now set AC with the same ESSID= Wireless and Pre_share Key= 951753258 in AC’s Menu 5.When AP and AC
link again then AP will send the settings to AC automatically.
Figure 3-15 Menu 5 - Wireless Setup
Step 7. In AC, Use Menu 24-8 into CI command, type ip ping 192.168.80.217
Figure 3-16 IP Ping
Step 8. In the menu 24-1, it will show the connection status between AP and AC.
3.2 Turning On ExpWave
Menu 5 – Wireless Setup
ESSID= Wireless
Channel ID= CH07 2442 MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Pre_share Key= 951753258
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
240B-AC> ip ping 192.168.80.217
Resolving 192.168.80.217... 192.168.80.217
sent rcvd rate rtt avg mdev max min
1 1 100 8 8 0 8 8
2 2 100 4 8 1 8 4
3 3 100 4 8 2 8 4
Menu 6.1 - AC1 LAN DHCP Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.223.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: