ZyXEL Communications NBG334W User Manual
Page 261
Advertising
![background image](/manuals/227734/261/background.png)
Appendix D Setting up Your Computer’s IP Address
NBG334W User’s Guide
261
"
Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
1 Click the Red Hat button (located on the bottom left corner), select System Setting and
click Network.
Figure 159 Red Hat 9.0: KDE: Network Configuration: Devices
2 Double-click on the profile of the network card you wish to configure. The Ethernet
Device General screen displays as shown.
Advertising