1 user mode, Table 137 command summary: user mode – ZyXEL Communications GS-4024 User Manual
Page 333
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
333
45.12.1 User Mode
The following table describes the commands available for User mode.
Table 137 Command Summary: User Mode
COMMAND
DESCRIPTION
PRIVILEG
E
help
Displays help information.
0
logout
Exits from the CLI.
0
exit
Logs out from the CLI.
0
history
Displays a list of previously command(s) that you
have executed. The Switch stores up to 256
commands in history.
0
enable
Accesses Enable (or privileged) mode. See
. Enable the highest
privilege level for executing commands.
0
<0-14>
Accesses Enable mode commands up to the
privilege level specified. See
.
0
Accesses Enable (or privileged) mode. See
0
show
ip
Displays IP related information.
0
hardware-monitor <C|F>
Displays current hardware monitor information with
the specified temperature unit (Celsius C or
Fahrenheit F).
0
system-information
Displays general system information.
0
alarm-status
Display which alarms are enabled on the Switch as
well as the LED status of the alarms.
0
cpu-utilization
Display statistics about the utilization of the CPU
on the Switch.
0
version flash
Display the version of the currently installed
firmware on the flash memory.
0
version <cr>
Display the version of the currently running
firmware on the Switch.
0
ping
<IP|host-name>
Sends Ping request to an Ethernet device.
0
<IP|host-name> [vlan
<vlan-id>]
[size <0-1472>]
[-t]
Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
0
help
Displays command help information.
0
traceroute
<ip|host-name>
Determines the path a packet takes to a device.
0
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device in a
VLAN.
0
help
Displays command help information.
0
ssh
<1|2>
<[user@]dest-ip>
Connects to an SSH server with the specified SSH
version.
0