ZyXEL Communications GS-4024 - Manual (Page 69)

Chapter 5 Initial Setup Example
GS-4012F/4024 User’s Guide
69
5.1.5 Enabling RIP
To exchange routing information with other routing devices across different routing domains,
enable RIP (Routing Information Protocol) in the RIP screen.
1 Click IP Application > RIP in the navigation panel.
2 Select Both in the Direction
field to set the Switch to
broadcast and receive
routing information.
3 In the Version field, select
RIP-1 for the RIP packet
format that is universally
supported.
4 Click Apply to save your
changes back to the run-time
memory. Settings in the run-time memory are lost when the Switch’s power is turned off.