ZyXEL Communications GS-3012F Series - Manual (Page 215)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
215
32.10.2 Enable Mode
The following table describes the commands available for Enable mode.
Table 82 Command Summary: Enable Mode
COMMAND DESCRIPTION PRIVILEGE
baudrate <1|2|3|4|5> Changes the console port speed.
Choices are 1 (38400), 2 (19200),
3(9600), 4 (57600) and 5
(115200).
13
boot config <index> Restarts the system with the
specified configuration file (1 or 2).
13
cable-
diagnosti
cs <port-list> Displays whether a cable is
connected to the port (good) or
not (open).
13
configure Accesses Configuration mode. 13
copy running-config
interface port-
channel <port>
<port-list> Clones (copies) the attributes from
the specified port to other ports.
13
[active]
[name]
[speed-duplex]
[bpdu-control]
[flow-control]
[intrusion-lock]
[vlan1q]
[vlan1q-member]
[bandwidth-limit]
[port-security]
[broadcast-storm-
control]
[mirroring]
[port-access-
authenticator]
[queuing-method]
[igmp-filtering]
[spanning-tree]
[mrstp]
[port-based-vlan]
Copies the specified attributes
from one port to other ports.
13
running-config
tftp <ip> <remote-
file> Backs up running configuration to
the specified TFTP server with the
specified file name.
13
tftp config <index>
<ip> <remote-
file>
Restores configuration with the
specified filename from the
specified TFTP server.
13
flash <ip>
<remote-file> Restores firmware via TFTP. 13
disable Exits Enable (or privileged) mode. 13
enable Accesses Enable (or privileged)
mode.
13
erase running-config Resets to the factory default
settings.
13