ZyXEL Communications GS-3012F Series - Manual (Page 232)

Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
232
32.10.4 config-vlan Commands
The following table lists the vlan commands in configuration mode.
Table 84 Command Summary: config-vlan Commands
COMMAND DESCRIPTION PRIVILEGE
vlan <1-4094> Creates a new VLAN group. 13
exit Leaves the VLAN configuration
mode.
13
fixed <port-
list> Specifies the port(s) to be a
permanent member of this VLAN
group.
13
forbidden
<port-list> Specifies the port(s) you want to
prohibit from joining this VLAN
group.
13
help Displays a list of available VLAN
commands.
13
inactive Disables the specified VLAN. 13
ip address <ip-address>
<mask> Sets the IP address and subnet
mask of the switch in the specified
VLAN for packet loopback test.
13
<ip-address>
<mask>
manageable Allows the switch to be managed
using this specified IP address.
13
default-gateway
<ip-address> Sets a default gateway IP address
for this VLAN.
13
inband-default
<ip-address>
<mask> Sets a static in-band IP address and
subnet mask.
13
inband-default
dhcp-bootp Sets the dynamic in-band IP
address.
13
inband-default
dhcp-bootp
release Releases the dynamic in-band IP
address.
13
inband-default
dhcp-bootp
renew Updates the dynamic in-band IP
address.
13
name <name-
str> Specifies a name for identification
purposes.
13
no fixed <port-
list>
Sets fixed port(s) to normal port(s). 13
forbidden
<port-list> Sets forbidden port(s) to normal
port(s).
13
inactive Enables the specified VLAN. 13
ip address <ip-
address> <mask> Deletes the IP address and subnet
mask from this VLAN.
13
ip address
default-gateway Deletes the default gateway from this
VLAN.
13