Yamaha HTR-6090 - Manual (Page 119)

115
En
USING MULTI-ZONE CONFIGURATION
AD
V
ANCED
OPE
R
A
T
IO
N
■ Selecting the input source of Zone 2
Press ZONE 2 INPUT to activate the Zone 2 input
select mode and then rotate the INPUT selector
on the front panel (or set the operation mode
selector to AMP and then press one of the input
selector buttons on the remote control) to select
the input source of the selected zone.
If the remote control is used to select the input source, “2:
name of the selected input source” is displayed in the
display window on the remote control when Zone 2 is
selected respectively.
• Select TUNER as the input source to use the TUNER
features in the selected zone. For details about the
TUNER operations, see “FM/AM TUNING” on
page 53.
• Select XM as the input source to use the XM Satellite
Radio features in the selected zone. For details about
the XM Satellite Radio operations, see “XM
SATELLITE RADIO TUNING” on page 60.
The selected input source is shared across all zones.
y
You must complete this step within 5 seconds while the selected
zone flashes in the front panel display. Otherwise, the currently
selected zone mode is automatically canceled. In this case, press
ZONE 2 INPUT on the front panel again.
■ Adjusting the volume level of Zone 2
Press ZONE 2 VOLUME to activate the Zone 2
volume control mode and then rotate VOLUME
on the front panel (or set the control mode of the
remote control to “ZONE 2” (see page 114) and
then press VOLUME +/–) to adjust the volume
level of the selected zone.
y
Press MUTE on the remote control to mute the sound output to
the selected zone.
When you use the external amplifiers in Zone 2, VOLUME +/–
can be used only when “ZONE2 VOL” is set to “VAR” in “ZONE
SET” (see page 99).
Note
INPUT
TV
SOURCE
AMP
INPUT
ZONE 2
or
V-AUX/DOCK
DTV DVR/VCR 2 VCR 1 DVD
CBL/SAT MD/TAPE CD-R
PHONO TUNER CD MULTI CH IN
XM
Note
+
–
VOLUME
VOLUME
ZONE 2 VOLUME
or
Front panel Remote control
01EN_00_HTR-6090_U.book Page 115 Tuesday, June 27, 2006 6:40 PM