Yamaha HTR-6090 - Manual (Page 47)

SOUND FIELD PROGRAMS
43
En
BA
S
IC
OPERA
T
ION
This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field
processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.
y
• When you set the “DECODER MODE” parameter in “INPUT MENU” to “AUTO”, this unit selects the appropriate digital decoder
according to the input signal.
• The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources.
• The YAMAHA HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in
actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections coming from
the front, back, left and right.
• You can change sound field parameters. See page 75 for details.
• When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.
• Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input
source (see page 40) and Audio input jack select is set to “ANALOG” (see page 39).
• When you play back DSD sources with any sound field program, this unit converts the DSD signals to PCM signals and then applies
the selected program and Audio input jack select is set to “ANALOG” (see page 39).
• When you play back DTS 96/24 sources with any sound field program, this unit applies the selected program without activating the
DTS 96/24 decoder.
• Sampling frequencies higher than 48 kHz are sampled down to 48 kHz or lower and then sound field programs are applied.
■ Front panel operations
Rotate the PROGRAM selector on the front panel.
The name of the selected sound field program appears in
the front panel display and in the OSD.
■ Remote control operations
Set the operation mode selector to AMP and then
press one of the sound field program selector
buttons on the remote control repeatedly.
The name of the selected sound field program appears in
the front panel display and in the OSD.
SOUND FIELD PROGRAMS
Selecting sound field programs
Notes
INPUT
VOLUME
MAIN ZONE
ZONE 2 ZONE 2 CONTROLS
ON/OFF
ENHANCER
SILENT CINEMA
NIGHT PHONES
OPTIMIZER MIC
MASTER
ON OFF
PURE DIRECT STRAIGHT
EFFECT
PROGRAM
TONE CONTROL AUDIO SELECT
INPUT
ZONE 2 ZONE 2 VOLUME
PRESET/TUNING FM/AM
SEARCH MODE EDIT
A/B/C/D/E
CATEGORY
PRESET/TUNING/CH MEMORY TUNINIG MODE
DISPLAY MAN'L/AUTO FM
VIDEO AUX
S VIDEO VIDEO AUDIO L R OPTICAL
INPUT
ON/OFF
PROGRAM selector
–
+ +
– –
+
ENTER
DISPLAY
AUDIO
MENU TITLE
TV MUTE TV INPUT MUTE
4 3 2
ENT +10 0 9
5
1
7 6 8
RETURN
VOLUME CH TV VOL
EFFECT
PARAMETER STRAIGHT
XM MEMORY
A-E/CAT.
SRCH MODE
PURE DIRECT PRESET/CH SET MENU
BAND
LEVEL
ENHANCER
STEREO SUR. DECODE SELECT EXTD SUR.
CLASSICAL LIVE/CLUB ENTERTAIN MOVIE
NIGHT
TV
SOURCE
AMP
AMP
Sound field program
selector buttons
01EN_00_HTR-6090_U.book Page 43 Tuesday, June 27, 2006 6:40 PM