EVS XSense Version 10.04 - January 2011 Operating Manual - Manual (Page 56)

XSense – Version 10.04 – Operating Manual
EVS Broadcast Equipment – January 2011
Issue
10.04.A
47
9.3 USING THE CLIP SCREEN
The VGA Clip screen is accessed by selecting the F9 key on the keyboard. With
this screen, clips can be recalled using the pen and tablet or directly from the
keyboard.
Important
The action performed on a channel from the Clip screen is concurrent to
any other controller that might be assigned to that channel: EVS Remote
Panel or external protocol. A command sent from the Clip screen to a
channel will overwrite whatever the channel was doing at that time.
9.3.1 C
LIP SCREEN
– S
TANDARD
V
IEW
The navigation through the Clip screen, and the various functions available on this
screen, can be performed using the tablet and stylus, or the keyboard shortcuts.
9.3.2 T
HE
T
ITLE
B
AR
The Title bar contains the status information:
• Number and name of the server currently selected for clips and for record
trains (*). The name is blinking red if it is a network machine.
• Total number of clips (i.e. protects, 1 camera angle counting for 1 clip in this
count)
• Total duration of all clips
• Remaining capacity on the server (all record trains together; valid for local
server only)