EVS MulticamLSM Version 10.01 - July 2009 Operating Manual - Manual (Page 126)

EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
117
3. Press to highlight V Base (SHIFT+A).
4. Press to highlight A Split (D).
5. Jog to the point where you want to set your transition.
6. Do one of the following:
o Mark an OUT point if you do an audio delay.
o Mark an IN point if you do an audio advance.
The value entered will be present on the PRV screen when the clip is next to
play in a playlist.
11.12.9 H
OW TO
P
ERFORM
A
N
‘A B
ASE
’ E
DIT
When in A Base mode the Browse function searches between audio IN/OUT
points and NOT video
11.12.9.1 V
IDEO
A
DVANCE
In this case, the video track will be advanced compared to the audio track.
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press SHIFT + A Base (B).
4. Press to highlight V Advance (SHIFT+A)
5. At the on screen prompt, enter a value on the F_ keys including leading
zeros (0+2+1+2= 2:12), OR move the lever and press ENTER.
The value entered will be present on the PRV SCREEN when the clip is next
to play in a playlist.
Edit point (A BASE)
Video is shortened in the previous clip and the video from the clip being
edited is extended.
11.12.9.2 V
IDEO
D
ELAY
In this case, the video track is delayed compared to the audio track.
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press SHIFT + A Base (B).