EVS XTnano Version 10.04 - January 2011 Operation Manual - Manual (Page 36)

Issue
10.04.A XTnano – Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
28
R
ST
C
AM
Rst Cam Sync To
PGM 1 PGM 2
This function restores the position of cameras on the active channels: CAM A on
PGM 1 and CAM B on PGM 2.
Note
When a clip/playlist is loaded on a channel, switching back to Live mode
will recall the record train, which was last used on that output. This
avoids too frequent uses of the Rst Cam function.
S
YNC
T
O
Rst Cam Sync To
PGM 1 PGM 2
This button allows you to synchronize the selected PGM in use with another one.
Press this button and then select the PGM to be used as a reference.
H
OW TO
A
SSIGN A
C
AMERA TO A
C
HANNEL
In Multi PGM mode, you can change the current camera on each PGM as follows:
1. In the operational menu, select the PGM to which you want to change the
current camera.
The TAKE key at the bottom of the remote is lighting red.
2. Press the TAKE key.
It lights green and the menu on the LCD display changes to let you select the
desired camera.
Rst Cam Local
CAM A CAM B CAM C CAM D
3. Press the camera you want to associate to the selected PGM.
4. Press TAKE again to return to the PGM selection menu.
Note
The 1 PGM mode is a simplified version of the 2 PGM mode. The
operational menu has less functions:
Rst Cam
Cam A Cam B