Aux clip, Postroll, Clip/cam – EVS XTnano Version 10.04 - January 2011 Operation Manual User Manual
Page 48: 10 using the clip screen, 11 license code, 10 u, 11 l, Sing the, Lip screen, Icense
![background image](/manuals/254259/48/background.png)
Issue
10.04.A
XTnano – Version 10.04 – Operating Manual
EVS Broadcast Equipment SA – January 2011
40
A
UX
C
LIP
Push
Aux
Clip
PostRoll
>Archive
Cam
This function allows assigning a clip as auxiliary audio clip to the current playlist.
Press CLEAR + Aux Clip (CLEAR + SHIFT + B) to remove the current auxiliary
clip. Refer to the Chapter 9 ‘Playlist Management’, on page 57 for more details.
P
OST
R
OLL
Push
Aux
Clip
PostRoll
>Archive
Cam
This function enables/disables the Post-Roll mode. This mode is explained in
details in the section ‘PostRoll’, on page 40.
C
LIP
/C
AM
Push
Aux
Clip
PostRoll
>Archive
Cam
Pressing the D key will toggle between CAM and CLIP modes on the remote.
Please note that this mode on the remote and on the VGA screens is never
synchronized. In CAM mode, the Archive assignment will apply only to the camera
angles of the clip loaded on the controlled channels. In CLIP mode, this function
will apply on all camera angles of the clip.
8.2.10 U
SING THE
C
LIP SCREEN
8.2.11 L
ICENSE
C
ODE
Note
The clip screen access is a software option, which requires the license
code 88 being installed. For more information on the required license key,
contact the Support or Sales team.
The VGA Clip screen is accessed by selecting the F9 key on the keyboard. With
this screen, clips can be recalled using the pen and tablet or directly from the
keyboard.
Important
The action performed on a channel from the Clip screen is concurrent to
any other controller that might be assigned to that channel by EVS
Remote Panel. A command sent from the Clip screen to a channel will
overwrite whatever the channel was doing at that time.