EVS IPDirector Version 5.6 - May 2009 Part 3 User's Manual - Manual (Page 61)

Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 3 – Browsing
EVS Broadcast Equipment – May 2009
50
Note
More extensive transfer monitoring is available from the main IPDirector
window. Refer to section Tools Menu / Transfer monitoring in part 1 of
the manual.
4.10 HOW TO MODIFY THE T/C IN OR THE
DATE OF A CLIP
The T/C and date corresponding to the IN point of a clip can be modified from the
contextual menu. This operation is very useful when re-ingesting a feed which
must then be associated to a log sheet, or simply because the A/V material
ingested corresponds to A/V material which was originally recorded at a different
T/C and date.
To modify the T/C IN or Date of a clip, proceed as follows:
1. Right-click the clip line (or XT clip line) in the Database Explorer grid.
The clip contextual menu is displayed.
2. Select Modify T/C IN or Date.
This opens the following window:
3. Type the new Timecode IN with the format HH:MM:SS:FF in the IN field.
4. Select the new Date for the clip in the Date In drop-down list.
5. Click the Save button to save your changes.
Note
This option is available when multiple clips are selected. All the controls
have then empty values and a single change can be applied to the entire
selection at once.