Product information, Linx, Treme – B&B Electronics ZXT9-RM-KIT - Manual User Manual

Page 8: Adio, Odem, Odels, Ackage, Ontents, Odes of, Peration

Advertising
background image

Document Number: pnZXTxRM-0712m

Page 8

Section Two

– Product Information

2.0 Product Information

2.1 Zlinx

®

Xtreme Radio Modem Models

ZXT9-RM - 900 MHz ISM Band Radio Modem
ZXT24-RM

– 2.4 GHz ISM Band Radio Modem

2.2 Package Contents

Zlinx

®

Xtreme Radio Modem

Software CD

Quick Start Guide

Antenna

Enclosure Mounting Ears and hardware

NOTE: the Cable Glands cannot be used for Class 1 Division 2 applications.
Please see the Quick Start Guide for additional information about UL Class 1
Division 2 installation instructions.

2.3 Modes of Operation

2.3.1 Point-to-Point Serial

This configuration is used to wirelessly transmit serial data from one location to another. A
Zlinx

®

Xtreme Radio Modem is configured with another radio modem of same frequency in

a master slave relationship to transmit serial data wirelessly. Typical applications include
connecting a device such as a pressure/flow transmitter to a PLC or SCADA system.

2.3.2 Point-to-Point Serial to Xtreme I/O

This configuration is employed to connect a PLC/HMI/SCADA system to a remote Xtreme
I/O or Zlinx I/O module to monitor or control discrete devices via Modbus. The serial
master (PLC/HMI/SCADA) is a Modbus RTU master and must be connected to the serial
port of the Radio Modem. Each Xtreme I/O device populates and updates its own Modbus
map and support Modbus RTU Slave format. The radio modem is connected to the
respective Modbus Master. Typical examples include a Water tank monitoring system
where a float sensor level data is transmitted to a HMI through the wireless network.

2.3.3 Point-to-Multi Point (Serial or Xtreme I/O)

A Radio Modem is configured to communicate with multiple other modems or I/O
modules.

The “master” modem is connected to the Modbus Master and can communicate

with Modbus Slaves connected to other radio modems or Xtreme I/O units. An example is
a PLC Process control/monitoring application requiring analog, digital and serial data to be
brought to a central PLC.

2.4 Operating States

The Zlinx

®

Radio Modem has six operating states.


Advertising