Xylem photoLab 6100 VIS - Manual (Page 49)

photoLab
®
6100 VIS Operation
49 ba75847e01 08/2009
Overview of the
settings
Menu item Explanation
Dilution Here you can set the dilution prior to measuring if
you want to use a diluted sample.
In the measured value display, the dilution is
indicated in the form [1 + x] (parts sample + parts
distilled water).
For more detailed information on dilution, see
section 4.5.7.
Sample blank value Here you can measure while taking a sample blank
value into account.
In the measured value display, measurements with
sample blank value are marked by [SB] (Sample
blank).
For more detailed information on sample blank
value, see section 4.5.8.
User-defined blank
value If available, a user-defined reagent blank value is
used.
In the measured value display, measurements with
a user-defined reagent blank value are marked by
[BV/Lot number].
For more detailed information on reagent blank
value, see section 4.5.9.
Turbidity correction Activates/deactivates the automatic turbidity
correction.
In the measured value display, measurements with
automatic turbidity correction are marked by
[TURB].
For more detailed information on the automatic
turbidity correction, see section 4.5.10.
Display absorbance Activates/deactivates the display of the
absorbance value in addition to the main
measured value.
AQA Here you can view and change the AQA settings
without discarding the current measurement.
Edit method Here you can edit user-defined methods.
New method Here you can create user-defined methods.
Measurement data
memory Here you can view the measurement data
memory.