Xylem photoLab 6100 VIS User Manual
Page 93
photoLab
®
6100 VIS
Operation
93
ba75847e01
08/2009
Rectangular cell:
Open the inner turn-up lid.
Insert the rectangular cell
vertically so it touches the bottom
and left edge of the cell shaft. The
opaque sides of the rectangular
cell must point to the front and
back.
The photometer has an external
light recognition. If there is too
much external light, a message
prompts you to close the cell shaft
cover.
The photometer starts recording
automatically.
3
Wait until the recording is finished.
Stopping the recording:
- Use [Stop] to terminate the
recording prematurely. The
curve recorded up to this point
can be stored and edited (see
section 4.9.6).
- Use <ESC> to completely
cancel measurement. The
curve recorded up to this point
is discarded.
Kinetics
04/16/07 9:52
4002
Number of measurements: 4
Duration: 00:00:24
Interval:00:00:06
Time [s]
Stop
Ab
so
rb
an
ce