Extron Electronics DMP 44 LC User Guide - Manual (Page 27)

Bass and Treble Shelving
Bass and treble shelving may be added to the filter, as shown below. Adding this filter
automatically inserts both bass and treble controls in the dialog box. If only a bass or only
a treble filter is required, either bypass the unneeded control or set it to
unused in the
selection box.
Figure 15. Bass and Treble Shelving
The corner frequency of the controls may be selected to 0.1 Hz accuracy. Two slopes,
6 and 12 dB/octave are available along with the ability to boost or cut the signal up to
24 dB.
Setting bass and treble filters
To set bass and treble filtering:
1. Check that bass and treble filtering have been defined.
DMP 44 LC • Operation 21